Easy Ways to Jumpstart a Motorcycle Without Battery

A lot of times, your motorcycle doesn’t start because it’s low on battery power. Even if you didn’t plug it in during the days and weeks preceding the problem, when you finally realize that your bike is dead and won’t fire up, there are some things you can do to jumpstart a motorcycle without a battery easily and quickly forward.

Before you hit the road again, read this guide to show you how to jumpstart a motorcycle. It’s not as complicated as it sounds.

Take a cup of coffee, relax and keep reading on!

How Do You Jumpstart a Motorcycle Without a Battery?

If you want to jumpstart a motorcycle without a battery, you need a way to crank the engine. There are several options, including gas-powered generators and jumpstart kits. However, ensure you get one with two cables connecting each side of the motorcycle’s frame and an extension cord.

It is better to take online motorcycle safety courses to learn technical things. In this way, you always won’t have to call for support in times of emergency.

Gas-powered Generators.

Generator For Motorcycle Jumpstart

If you have a battery or don’t feel like carrying around a battery charger and cables, you can use a gas-powered generator to jumpstart it. This process is easy once you have all the necessary parts on hand.

Using a gas-powered generator is a great, efficient way to jumpstart a motorcycle without a battery. Gas-powered generators can supply enough electrical power to jumpstart a motorbike without a battery. Once connected, turn the generator on and leave it running for several minutes while you’re waiting for the engine to crank over. If a gas-powered generator is not available, use one that runs on gasoline or diesel fuel.

Portable powerpack/jumps start cables.

Jumpstart Cables For Motorcycle

Another option is using an electrician’s portable powerpack or jumps start cable. These devices have two plugs – one male and one female – so you can easily plug them into the battery and ignition of your motorcycle for you to get underway again quickly once your bike has run out of juice.


Also Read: Understanding Motorcycle Warning Lights


If you have a battery-powered motorcycle, there are other options. You can try using the bike’s ignition switch to start it. Look for a button near the handlebars that turn the engine on and off. If your bike has an automatic transmission, try turning it over by hand several times without starting it – this will often crank the engine up enough to turn over automatically when you finally give it some gas.

Remember, if you can start your motorcycle without a battery, that’s great! But if all other attempts fail or your bike won’t turn over by hand or with the ignition switch, it might be worthwhile calling for assistance.

Is it OK to Jump-Start a Motorcycle With a Car Battery?

Yes, You can jumpstart a motorbike with a car battery if the car is parked and you have the correct cables. Before going through the process:

  1. Disconnect any accessories that electricity could damage, such as lights or radios.
  2. Make sure nothing metal is close to the battery terminals – open cans of paint or propane may do this.
  3. Find an area free from obstacles that will allow both vehicles enough room to move (10 feet should be plenty).

Disconnect both batteries before jumping them – one at a time for safety reasons. Place one cable end into each battery connection, ensuring the positive and negative ends correspond. 

Put the clamps on the wires, then connect each line to its respective car battery. Be sure not to touch either battery with metal while doing this – it could cause a short circuit. Start both engines and wait until they stop before disconnecting each cable from its respective car battery. 

If everything goes well, your motorcycle should now be running on battery power. Motorcycle battery jumpstarting is relatively safe, but it’s always best to contact a professional if you have any doubts about the process.

Common Reasons For a New motorcycle Battery to Become Dead

Caring Tips For Motorcycle Battery

Many times, it’s not the battery that’s dead. It could be more accessible and relatively straightforward as a disconnection or misconnection between the bike and the battery. So, before assuming a problem with your battery, please inspect your new motorcycle at the service center.

Some widespread issues that can cause a motorcycle battery to die to include:

  • A weak electrical connection
  • Damaged cables or connectors
  • Incorrectly installed accessories
  • Low oil level
  • Incorrect charging methods
  • Repairs or modifications not completed properly
  • Excessive use
  • Malfunctions or failures of other electrical components

If your battery is dead, you must repair or replace it as soon as possible. If you’re unsure what the issue is, it’s always best to contact a professional.

There are a few habits that you can practice to help keep your motorcycle battery healthy and robust. Some of these include:

  • Never abuse the battery by overcharging or letting the bike run without power.
  • Always inspect connections, cables, and connectors for wear or damage.
  • Keep the engine oil topped off, as low levels can weaken batteries.
  • Check for proper charging methods. Using an improper charger could be damaging.
  • Keep your motorcycle well maintained.
  • By doing routine Maintenance and checks, you can help ensure that there are no electrical issues that could cause the battery to die.

How to Fast Charge Motorcycle Batteries

There are a couple of ways to fast charge motorcycle batteries. One is to use an external charger, which is supposed to get plugged into your garage’s cigarette lighter or power outlet. Another excellent option is to use a good trickle charger, which slowly charges the battery over time. If you’re using an external charger, bring your motorcycle’s battery and the charger to a full charge before starting the charging process. Once you connect the bike to the external charger, it will begin charging automatically.

If you’re using a trickle charger, connect it to your bike’s battery and turn it on. The chargers will slowly charge your motorcycle battery over time.

How to Charge Your Bike Battery at Home?

If you have a trickle charger, it will slowly bring the battery up to full charge. You don’t need to disconnect your battery when charging it at home. Make sure the engine isn’t running and connect the charger to the bike’s 12-volt DC outlet.

Some chargers feature an indicator light that will tell you when the battery is full. If your bike doesn’t have a trickle charger, you’ll need to disconnect the battery and connect it to a dedicated charging system. In this case, ensure the engine isn’t running and connect the charging cable to the motorcycle’s 12-volt DC outlet. Once connected, your bike will start charging.